AOD508/AOI508
30V N-Channel AlphaMOS
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
Conditions
Min
Typ
Max Units
STATIC PARAMETERS
ID=250µA, VGS=0V
BVDSS
Drain-Source Breakdown Voltage
30
V
VDS=30V, VGS=0V
1
IDSS
Zero Gate Voltage Drain Current
µA
5
TJ=55°C
V
DS=0V, VGS= ±20V
IGSS
Gate-Body leakage current
Gate Threshold Voltage
100
2.2
3
nA
V
VGS(th)
VDS=VGS，ID=250µA
1.2
1.8
2.4
3.5
3.3
105
0.7
VGS=10V, ID=20A
mΩ
RDS(ON)
Static Drain-Source On-Resistance
TJ=125°C
4.4
4.5
VGS=4.5V, ID=20A
VDS=5V, ID=20A
IS=1A,VGS=0V
mΩ
S
gFS
VSD
IS
Forward Transconductance
Diode Forward Voltage
1
V
Maximum Body-Diode Continuous Current G
58
A
DYNAMIC PARAMETERS
Ciss
Coss
Crss
Rg
Input Capacitance
2010
898
124
1.8
pF
pF
pF
Ω
VGS=0V, VDS=15V, f=1MHz
Output Capacitance
Reverse Transfer Capacitance
Gate resistance
VGS=0V, VDS=0V, f=1MHz
0.9
2.7
SWITCHING PARAMETERS
Qg(10V) Total Gate Charge
36
17
49
23
nC
nC
nC
nC
ns
Qg(4.5V) Total Gate Charge
VGS=10V, VDS=15V, ID=20A
Qgs
Qgd
tD(on)
tr
Gate Source Charge
Gate Drain Charge
Turn-On DelayTime
Turn-On Rise Time
Turn-Off DelayTime
Turn-Off Fall Time
6
8
7.5
4.0
37.0
7.5
VGS=10V, VDS=15V, RL=0.75Ω,
RGEN=3Ω
ns
tD(off)
tf
ns
ns
trr
IF=20A, dI/dt=500A/µs
IF=20A, dI/dt=500A/µs
Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge
14
ns
Qrr
nC
20.3
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The
Power dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends
on the user's specific board design, and the maximum temperature of 175°C may be used if the PCB allows it.
B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Single pulse width limited by junction temperature TJ(MAX)=175°C.
D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming
a maximum junction temperature of TJ(MAX)=175°C. The SOA curve provides a single pulse rating.
G. The maximum current rating is package limited.
H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C.
2/6
www.freescale.net.cn
FREESCALE [ Freescale ]
