GP1A173LCS3F
■
Recommended Installation Hole drawing
Unit : 1/1mm
(Drawing No. CY15165i06)
*1 We recommend to fix GP1A173LCS3F at punching side on the fixing plate (metal plate).
*2 Please decide the final dimensions at your side after confirmation by the actual
applications, Because mounting efficiency and mounted stabilization are dependent
on mounting plate corner-R and punched state.
*3 Tolerance shall be ±0.1mm
*4 Please don’t hold connector area but sensor area when fitting in or putting out on the metal plate.
Normal mounting type
Thickness of plate for 1.6mm
Thickness of plate for 1.2mm
Thickness of plate for 1.0mm
Irregular mounting protection type
Thickness of plate for 1.6mm
Thickness of plate for 1.2mm
Thickness of plate for 1.0mm
Sheet No.: OP14021EN
7
SHARP [ SHARP ELECTRIONIC COMPONENTS ]
