Model No. GM2BB65BMAC
Doc. No. DG-104025A Page 16/ 24
5.1.3テーピング仕様 Taping technical specification
引き出し方向
Feeding direction
(
)
空部
リーダー部 空部
製品収納部
Empty
Leader(Empty)
400mm
以上
LEDs inside
160mm
以上
MIN. 160mm
MIN. 400mm
テープ剥離強度ꢀ0.1N~1.0N (θ =0~10°)
Cover tape separation
テープ剥離強度:ꢀ
0.1N 0.8.8N (θ=0~10°)
0.1N~0 N
~
0.1Nꢀ~1.0N
カバーテープ
Cover Tape
F
F
F=0.1~1.0 N (θ=10°or less)
カバーテープ
0~10 °
0~10°
テープ送り速度:5 mm/s
テープ送り速度
Tape speed: 5 mm/s
5 mm/s
5mm/s
キャリアテープ
キャリアテープ
Carrier Tape
テープ送り方向
テープ送り方向
Forward
Stuffed
(1) テープ曲げ強度:半径30 mm 以下でテープを曲げると、カバーテープが剥がれることがあります。
Tape strength against bending: The radius of curvature should be more than 30 mm.
If i bent at less than 30 mm, the cover may peel off.
(2) テープの継ぎ:1リール内でのカバーテープ及びキャリアテープの継ぎはありません。
Joint of the tape: No joint of cover tape or carrier tape in one reel
(3) 包装数量:標準数量2 000 個/リール
Quantity: 2 000 pcs. per reel (standard)
(4) 製品質量:約30 mg(製品1個あたりの質量/参考値)
Product mass: Approx. 30 mg (One piece of LED/ Reference value)
(5) その他
Others:
①製品収納部における製品の連続抜けは無いものとします。
There are no continuous empty pockets except leader and trailer part.
②部品欠落数は、リール総部品数の0.1%以下とします。
The quantity of the products lacking should be less than 0.1% of total product quantity.
③製品のカバーテープへの付着はありません。
Products should not be attached to the cover tape when it peeled off.