Model No. GM2BB**QT4E
“Contents in this technical document be changed without any notice due to the product modification.”
http://www.sharp-world.com/products/device/
6-2-3.Taping technical specification
Feeding direction
Empty
LEDs inside
Leader(Empty)
MIN. 160mm
MIN. 400mm
F
Cover tape separation
Cover Tape
Tape speed:5mm/s
0.1N ~ 1.0N(Θ=10°以下)
0 ~ 10°
Forward
Carrier Tape
(1)Tape strength against bending: The radius of curvature should be more than 30 mm.
If i bent at less than 30 mm, the cover may peel off.
(2) Joint of the tape: No joint of cover tape or carrier tape in one reel
(3) Quantity: 2 000 pcs. per reel (standard)
(4) Product mass: Approx. 30mg (One piece of LED/ Reference value)
(5) Others:
①There are no continuous empty pockets except leader and trailer part.
ꢀ②The quantity of the products lacking should be less than 0.1% of total product quantity.
ꢀ③Products should not be attached to the cover tape when it peeled off.
13
sharp LD-E7-6-14-A