GL100MN0MPx
Storage and Handling
1. Store these parts between 5°C and 30°C, at a relative humidity of less than 70%.
2. After breaking the package seal, maintain the environment within 5°C to 25°C, at a relative humidity of less than
60%, and mount the parts within two days. If unable to do so, bake before mounting.
3. When storing the parts after breaking the seal, Sharp recommends storage of no longer than two weeks in a dry
box or by resealing the parts in a moisture-proof bag with a desiccant. If unable to do so, bake before mounting.
4. When baking the parts before mounting, Sharp recommends baking the parts only once and only if in a metal
tray or mounted on a PCB. Recommended conditions are for 16 to 24 hours, at a temperature of 125°C.
■
Presence of ODCs (RoHS Compliance)
This product shall not contain the following materials, and they are not used in the production process for this
product:
• Regulated substances: CFCs, Halon, Carbon tetrachloride, 1,1,1-Trichloroethane (Methylchloroform). Specific
brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
• Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl
ethers (PBDE).
• Content information about the six substances specified in “Management Methods for Control of Pollution
Caused by Electronic Information Products Regulation” (Chinese:
)
Toxic and Hazdardous Substances
Category
Lead (Pb) mercury (Hg) Cadmium (Cd)
✓
✓
✓
Hexavalent
chromiun (Cr
6+
)
✓
Polybrominated
biphenyls (PBB)
✓
Polybrominated
diphenyl ethers
(PBDE)
✓
Infrared Emitting Diode
NOTE:
✓
indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement
as described in SJ/T 11363-2006 standard.
■
Taping Specifications
1.
2.
3.
4.
5.
6.
Tape structure and dimensions conforms to those shown in Fig. 11 to Fig. 16.
Product insertion will have the cathode to the hole side of the tape.
Cover tape peel-separation force: F = 0.2 to 1.0 N (where
θ
160° to 180°)
Quantity per reel = 2000 pcs. (GL100MN0MP) or 1500 pcs. (GL100MN0MP1)
Product mass: 0.01 g (approx.)
Packaging:
a. Reels are sealed inside an aluminum bag, along with a humidity indicator card.
b. Bags are labeled and securely packed.
Sheet No.: D1-A00601EN
7
SHARP [ SHARP ELECTRIONIC COMPONENTS ]
