PACKAGE/ORDERING INFORMATION
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
PACKAGE
OPTION
MARKING
INFORMATION
ORDER NUMBER
SGM9117ZS/TR
SGM9117XS/TR
SO-8
SO-8
0℃to +70℃
-40℃to +125℃
Tape and Reel, 2500
Tape and Reel, 2500
SGM9117ZS
SGM9117XS
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V+ to V- . . . . . . . . . . . . . . . . . . . . . 7.5 V
Input Voltage
PIN DESCRIPTION
PIN
NAME
FUNCTION
. . . . . . . . . . . . . . . . . . . . GND – 0.3 V to (+VS) +0.3V
Storage Temperature Range . . . . . . . . .–65℃ to +150℃
Junction Temperature . . . . . . . . . . . . . . . .. . . . . . . .160℃
Operating Temperature Range . . . . . . –40℃ to +125℃
Power Dissipation, PD @ TA = 25℃
SO-8 .............................................................................0.8W
Package Thermal Resistance
SO-8, θJA................................................................ 128℃/W
Lead Temperature Range (Soldering 10 sec)
. . . . . . . . . . .. . . . . . . . . . . . . . . . 260℃
Video input, channel 1
1
2
3
4
5
6
7
8
IN1
IN2
IN3
Video input, channel 2
Video input, channel 3
Power supply
+VS
Ground
GND
OUT3
OUT2
OUT1
Filtered output, channel 3
Filtered output, channel 2
Filtered output, channel 1
CAUTION
ESD Susceptibility
HBM...........................................................................4000V
MM...............................................................................400V
This integrated circuit can be damaged by ESD if you
don’t pay attention to ESD protection. Shengbang
Micro-electronics recommends that all integrated
circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage.
ESD damage can range from subtle performance
degradation to complete device failure. Precision
integrated circuits may be more susceptible to
damage because very small parametric changes could
cause the device not to meet its published
specifications.
NOTES
1. Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This is
a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
3
SGM9117