欢迎访问ic37.com |
会员登录 免费注册
发布采购

HCLA0050HU 参数 Datasheet PDF下载

HCLA0050HU图片预览
型号: HCLA0050HU
PDF下载: 下载PDF文件 查看货源
内容描述: 微型扩增低压传感器 [Miniature amplified low pressure sensors]
分类和应用: 传感器
文件页数/大小: 15 页 / 192 K
品牌: SENSORTECHNICS [ SENSORTECHNICS GMBH ]
 浏览型号HCLA0050HU的Datasheet PDF文件第1页浏览型号HCLA0050HU的Datasheet PDF文件第3页浏览型号HCLA0050HU的Datasheet PDF文件第4页浏览型号HCLA0050HU的Datasheet PDF文件第5页浏览型号HCLA0050HU的Datasheet PDF文件第6页浏览型号HCLA0050HU的Datasheet PDF文件第7页浏览型号HCLA0050HU的Datasheet PDF文件第8页浏览型号HCLA0050HU的Datasheet PDF文件第9页  
HCLA Series  
Miniature amplified low pressure sensors  
PRESSURE SENSOR CHARACTERISTICS  
(Vs = 5.0 V, TA = 25 °C, analog output signal is ratiometric to VS, digital output signal is not ratiometric to VS,  
pressure applied to high pressure port)  
Part no.  
Operating pressure Proof pressure5,7 Burst pressure6,7 Output signal  
HCLA02X5...B  
HCLA12X5...B  
HCLA0025...B  
HCLA0050...B  
HCLA0075...B  
HCLA02X5...U  
HCLA12X5...U  
HCLA0025...U  
HCLA0050...U  
HCLA0075...U  
0...±2.5 mbar  
0...±12.5 mbar  
0...±25 mbar  
0...±50 mbar  
0...±75 mbar  
0...2.5 mbar  
0...12.5 mbar  
0...25 mbar  
250 mbar  
250 mbar  
500 mbar  
750 mbar  
1200 mbar  
250 mbar  
250 mbar  
500 mbar  
750 mbar  
1200 mbar  
500 mbar  
500 mbar  
750 mbar  
1200 mbar  
2000 mbar  
500 mbar  
500 mbar  
750 mbar  
1200 mbar  
2000 mbar  
2.25 ±2 V  
0.25 - 4.25 V  
0...50 mbar  
0...75 mbar  
Specification notes:  
1. Shift is relative to 25°C.  
2. Shift is within the first hour of excitation applied to the device.  
3. Non-linearity refers to the Best Straight Line fit, measured for lowest specified pressure, highest specified pressure and 1/2 full  
scale pressure.  
4. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest highest  
pressure.  
5. Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters  
of the sensing element.  
6. Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks to  
the housing.  
7. The common mode pressure for the HCLA series is 2 bar. Common mode pressure is the maximum pressure that can be  
applied to both ports of a differential pressure sensor simultaneously without damaging the sensor housing.  
8. Max. delay time between pressure change at the pressure die and signal change at the output.  
9. The response time depends on the adjusted internal A/D resolution of the sensor. For 12 bit it is typ. 0.5 ms. Other A/D  
resolutions and reponse times are available on request. Please contact Sensortechnics for further information.  
10. Sensors with lower current consumption are available on request. Please contact Sensortechnics for further information.  
E / 11629 / A  
2/15  
www.sensortechnics.com