SC206KSIT
120 kHz Bandwidth, High Voltage Isolation
Current Sensor with Integrated Overcurrent Detection
Functional Block Diagram
Terminal List Table, Latching Version
Number
Name
Description
Sensed current copper conduction path pins. Terminals
for current being sensed; fused internally, loop to IP–
pins; unidirectional or bidirectional current flow.
1 through 4
IP+
Sensed current copper conduction path pins. Terminals
for current being sensed; fused internally, loop to IP+
pins; unidirectional or bidirectional current flow.
5 through 8
IP–
9
GND
VZCR
Device ground connection.
Voltage Reference Output pin. Zero current (0 A)
reference; output voltage on this pin scales with VCC
(Not a highly accurate reference.)
10
.
Filter pin. Terminal for an external capacitor connected
from this pin to GND to set the device bandwidth.
11
12
FILTER
VIOUT
Analog Output pin. Output voltage on this pin is
proportional to current flowing through the loop
between the IP+ pins and IP– pins.
Overcurrent Fault pin. When current flowing
between IP+ pins and IP– pins exceeds the
overcurrent fault threshold, this pin transitions to a
logic low state.
13
FAULT
14
15
VCC
VOC
Supply voltage.
Overcurrent Input pin. Analog input voltage on this
pin sets the overcurrent fault threshold.
Enables overcurrent faulting when high. Resets
16
FAULT_EN
when low.
FAULT
4/13