A1103
Unipolar Hall-Effect Digital Switch
General Descriptions
The A1103 is a unipolar Hall-effect sensor IC fabricated
from bipolar technology. The device integrates a voltage
regulator, reverse battery protection diode, Hall sensor with
dynamic offset cancellation system, temperature
compensation circuitry, small signal amplifier, Schmitt
trigger and an open-collector output to sink up to 25 mA.
With suitable output pull up, they can be used with bipolar
or CMOS logic circuits.
more stable with both temperature and supply voltage
changes. The unipolar switching characteristic makes these
devices ideal for use with a simple bar or rod magnet.
Thanks to its wide operating voltage range and extended
choice of temperature range, it is quite suitable for use in
automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor (SOT)
or in a Plastic Single In Line (SIP 3L flat). Both 3-lead
packages are RoHS compliant.
These Hall-effect switches are monolithic integrated circuits
with tighter magnetic specifications, designed to operate
continuously over extended temperatures to +150℃,and are
Glossary of Terms
MilliTesla (mT),
RoHS
Gauss
Restriction of Hazardous Substances
Magnetic flux density applied on the branded side of the package which turns the output
driver ON (VOUT = VDSon
Units of magnetic flux density: 1mT = 10 Gauss
Operating Point (BOP
)
)
Release Point (BRP
)
Magnetic flux density applied on the branded side of the package which turns the output
driver OFF (VOUT = high)
2
V1.10 May 1, 2011
SECELECTRONICS [ SEC Electronics Inc. ]
