LB1960M
Pin Assignment
IN+ 1
HB+ 2
LB1960M
8 VCC
7 CT
6 OUT2
5 GND
IN– 3
OUT1 4
Top view
Sample Application Circuit
5/12V power supply (3.8 to 18V)
VCC
HB+
RH
H
IN+
IN–
OUT2
OUT1
CT
0.1
µ
F
GND
On-board parts
Precautions
• If CT pin is connected to GND, the lockup protection and restart functions are disabled.
• In a circuit configuration as shown above, a power supply/GND reverse connection will cause a current to flow as
follows: GND -> OUT -> coil -> power supply. The value of this current is limited by the coil resistance. If it is less
than 500 mA, the IC will not be destroyed. If required, insert a diode between V
CC
and the coil.
No. 6191-3/4