3212
MICROPOWER,
ULTRA-SENSITIVE
HALL-EFFECT SWITCHES
Surface-Mount Lead Form (order A3212EUA-TL)
Dimensions in Inches
(controlling dimensions)
Dimensions in Millimeters
(for reference only)
0.095
±0.005
2.41
±0.13
0.002
MAX
0.051
MAX
0.004
MAX
0°–8°
0.020
MIN
FLAT
Dwg. MH-015 in
0.10
MAX
0°–8°
0.51
MIN
FLAT
Dwg. MH-015 mm
Radial Lead Form (order A3212EUA-LC)
1
2
3
0.620"
0.500"
(15.7 mm
12.7 mm)
0.108"
(2.74 mm)
The products described herein are manufactured under one or
more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;
5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents
pending.
0.100"
(2.5 mm)
Dwg. MH-026
NOTE: Lead-form dimensions are the nominals produced on the
forming equipment. No dimensional tolerance is implied or
guaranteed for bulk packaging (500 pieces per bag).
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be
required to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsi-
bility for its use; nor for any infringements of patents or other rights of
third parties that may result from its use.
www.allegromicro.com
9
SANKEN [ SANKEN ELECTRIC ]
