三合微科股�½有限公司
S
AM
H
OP
Microelectronics Corp.
SM5221-001/002
32 KEYS ENCODER
(3) Custom Code
The DOUT output custom code can be set in any of 65536 ways by means of the diodes
attached to the CODE (Custom Code Select) pin and the KI/O pins and the pull-up resistors
attached to the KI/O pins. When a code other than code 00000000 (no diode connection)
is used.
(4) Custom Code Mask ROM Specification
The custom code can also be set by mask ROM. When the mask ROM specification is used
the custom code can be set without the connection of external diodes and resistors, and by
combining external diodes and resistors with mask ROM it is possible to output a code with
different contents from those set by the mask ROM. When mask ROM specification is used,
(Ver. I) or (Ver. II) can be selected.
Custom Code High-Order
8 Bits
Ver. I
Determined by logical OR of internal
ROM1 and external diode positions.
C0, C1, C2:
Determined by wiring one of pins
KI/O0 thru KI/O7 to CCS pin.
C3 thru C7:
Determined by internal ROM3 and
absence/presence of KI/O6 & KI/O7
external pull-up resistors.
Custom Code' Low-Order
8 Bits
Determined by logical OR of interanl ROM2
and external pull-up resistor positions
Determined by logical OR of internal ROM2
and external pull-up resistor (KI/O0 thru
KI/O5) positions.
Ver. II
* Standard product SM5221-001/002 uses the Ver. I
specification
Internal ROM is set as follows:
ROM 1
Custom code high-order 8 bits
0
0
0
0
0
0
0
0
ROM 2
Custom code' low-order 8 bits
0
0
0
0
0
0
0
0
C0 C1 C2 C3 C4 C5 C6 C7
C0 C1 C2 C3 C4 C5 C6 C7
* Standard product SM5221-002 uses the Ver. II specification.
Page 7
V.2.0 Mar 8,2002
SAMHOP [ SAMHOP MICROELECTRONICS CORP. ]
