欢迎访问ic37.com |
会员登录 免费注册
发布采购

NDC-T 参数 Datasheet PDF下载

NDC-T图片预览
型号: NDC-T
PDF下载: 下载PDF文件 查看货源
内容描述: 标准磁铁 [Standard Magnets]
分类和应用:
文件页数/大小: 4 页 / 115 K
品牌: RRE [ Reed Relays and Electronics ]
 浏览型号NDC-T的Datasheet PDF文件第1页浏览型号NDC-T的Datasheet PDF文件第2页浏览型号NDC-T的Datasheet PDF文件第4页  
Restriction of Hazardous Substances  
RoHS Compliance  
In late 2002 the European Parliament approved two directives related to the reduction of electrical and electronic waste, namely  
the Waste Electrical and Electronic Equipment (WEEE) and Restriction of the use of certain Hazardous Substances (RoHS)  
Directives. The WEEE Directive aims to regulate the reuse, recycling and recovery of waste electrical and electronic equipment;  
the ultimate goal is to prevent the disposal of this waste.  
In the RoHS Directive, the use of the aforementioned substances in most electrical and electronic equipment will be banned or  
severely restricted. The RoHS Directive calls for the elimination of these substances from most electronic equipment starting 1 July  
2006. Our products are SGS certified for the RoHS compliant levels of Lead, Mercury, Cadmium and Hexalent Chromium.  
End-of-Life Vehicle (ELV)  
End-of-Life Vehicle (ELV) regulations set limits for the following substances:  
Lead  
Mercury  
Cadmium  
Hexavalent Chromium  
Restriction of Hazardous Substances (RoHS)  
The Reduction of Hazardous Substances (RoHS) regulations set limits for the following substances:  
Lead  
Mercury  
Cadmium  
Hexavalent Chromium  
Polybrominated Biphenyls (PBB)  
Polybrominated Diphenyl Ethers (PBDE)  
To certify to the above compliances, these substances must not be intentionally added to the product AND cannot exceed the  
following maximum allowable levels as a trace substance:  
0.1% (1,000 ppm) for: Lead*, Mercury, Hexavalent Chromium, PBB and PBDE  
0.01% (100 ppm) for: Cadmium  
*Lead as an alloying element in copper alloys is allowed up to 4.0% (40,000 ppm); in steel up to 0.35% (3,500 ppm) is allowed; in  
aluminum alloys up to 0.40% (4,000 ppm) is allowed. These requirements must be applied at the homogeneous material level.  
Since RoHS compliance is a stricter standard than ELV compliance, parts that are RoHS compliant are also ELV compliant.  
Due to continual improvement, specifications are subject to change without notice  
www.reed-sensor.com  
20 January 2009  
s
Reed Relays and Electronics India Limited info@reed-switch.com Tel 91-44-6528-4022