PMR10
Characteristics
Item
Guaranteed value
Resistor type
Test conditions (JIS C 5201-1)
JIS C 5201-1 4.5
Measuring method : Measure under
terminations by 4 probes.
Fig.2 (Under terminations)
probes
×
×
×
×
Data Sheet
Resistance
F :
±1%
G :
±2%
J :
±5%
Variation of resistance
with temperature
Overload
See Table.1
±2.0%
JIS C 5201-1 4.8
Measurement : 25 /
−55
/ +25 /
+125°C
JIS C 5201-1 4.13
Rated power
×2.5,
2s.
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s.
JIS C 5201-1 4.18
Soldering condition : 260±5°C
Duration of immersion : 10±1s.
JIS C 5201-1 4.19
Test temp. :
−55°C
to
+125°C
5cyc
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 56days
JIS C 5201-1 4.25.1
70°C,Rated power
1.5h : ON
−
0.5h : OFF
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.3
155°C
Test time : 1,000h to 1,048h
JIS C 5201-1 4.29
23±5°C
Solvent : 2-propanol
JIS C 5201-1 4.33
Solderability
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
±1.0%
No remarkable abnormality on the appearance.
±1.0%
Resistance to
soldering heat
Rapid change of
temperature
Damp heat, steady state
±3.0%
Endurance at 70°C
±3.0%
Endurance
±3.0%
Resistance to solvent
±0.5%
Bend strength of
the end face plating
Without open
www.rohm.com
c
○
2010 ROHM Co., Ltd. All rights reserved.
2/4
2010.09 - Rev.D