ADM3491
OUTLINE DIMENSIONS
0.685 (17.40)
0.665 (16.89)
0.645 (16.38)
0.295 (7.49)
0.285 (7.24)
0.275 (6.99)
14
1
8
7
0.100 (2.54)
BSC
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.015 (0.38)
MIN
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
0.180 (4.57)
MAX
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
SEATING
PLANE
0.022 (0.56) 0.060 (1.52)
0.018 (0.46) 0.050 (1.27)
0.014 (0.36) 0.045 (1.14)
COMPLIANT TO JEDEC STANDARDS MO-095-AB
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 27. 14-Lead Plastic DIP
(N-14)
Dimensions shown in inches and (millimeters)
8.75 (0.3445)
8.55 (0.3366)
14
1
8
7
4.00 (0.1575)
3.80 (0.1496)
6.20 (0.2441)
5.80 (0.2283)
1.27 (0.0500)
BSC
0.50 (0.0197)
0.25 (0.0098)
1.75 (0.0689)
1.35 (0.0531)
× 45°
0.25 (0.0098)
0.10 (0.0039)
8°
0°
0.51 (0.0201)
0.31 (0.0122)
SEATING
PLANE
1.27 (0.0500)
0.40 (0.0157)
COPLANARITY
0.10
0.25 (0.0098)
0.17 (0.0067)
COMPLIANT TO JEDEC STANDARDS MS-012AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 28. 14-Lead Narrow Body Small Outline (SOIC)
(R-14)
Dimensions shown in inches and (millimeters)
Rev. A | Page 12 of 16
ROCHESTER [ Rochester Electronics ]
