ASM202E/ASM±±8±A
ABꢁOLUTE MAXIMUM RATINGꢁ
TA = 25°C, unless otherwise noted.
Table 2.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may
affect device reliability.
Parameter
ꢀalues
VCC
V+
V–
−0.3 V to +6 V
(VCC − 0.3 V) to +14 V
+0.3 V to −14 V
Input Voltages
TIN
RIN
0.3 V to (V+, +0.3 V)
±30 V
Output Voltages
TOUT
±15 V
ROUT
–0.3 V to (VCC + 0.3 V)
Short-Circuit Duration
TOUT
Continuous
450 mW
Power Dissipation N-16
(Derate 6 mW/°C Above 50°C)
θJA, Thermal Impedance
Power Dissipation R-16
(Derate 6 mW/°C Above 50°C)
θJA, Thermal Impedance
Power Dissipation RU-16
(Derate 6 mW/°C Above 50°C)
θJA, Thermal Impedance
Operating Temperature Range
Industrial (A Version)
Storage Temperature Range
Lead Temperature (Soldering, 10 sec)
117°C/W
450 mW
158°C/W
500 mW
158°C/W
–40°C to +85°C
–65°C to +150°C
300°C
ESD Rating (MIL-STD-883B) (I/O Pins) ±15 kV
ESD Rating (IEC1000-4-2 Air) (I/O Pins) ±15 kV
ESD Rating (IEC1000-4-2 Contact)
(I/O Pins)
±8 kV
EFT Rating (IEC1000-4-4) (I/O Pins)
±2 kV
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. C | Page 4 of 16
ROCHESTER [ Rochester Electronics ]
