RN5RT
TYPICAL APPLICATION
IOUT
2
5
3
VDD
VOUT
CE
VIN
C1
C2
GND
1
In the RN5RT Series, a constant voltage can be obtained without using Capacitor C1 and C2. However, when the
wire connected to VIN is long, use Capacitor C1. Transient noise of output voltage occurred due to load deviation can
be reduced by using Capacitor C2.
Insert Capacitors C1 and C2 with the capacitance of 0.1µF to 2.0µF between InputꢀOutput Pins and GND Pin
with minimum wiring.
16