®
RT7262A
2A, 21V 500kHz Synchronous Step-Down Converter
General Description
The RT7262A is a synchronous step-down regulator with
integrated power MOSFETs. It achieves 2A of continuous
output current over a wide input supply range with excellent
load and line regulation. Current mode operation provides
fast transient response and eases loop stabilization.
Fault condition protection includes cycle-by-cycle current
limiting and thermal shutdown. An adjustable soft-start
reduces the stress on the input source at start-up.
The RT7262A requires a minimal number of readily
available external components, providing a compact
solution.
Features
Wide Input Range : 4.5V to 21V
Adjustable Output from 0.808V to 15V
2A Output Current
150mΩ/60mΩ Internal Power MOSFET Switch
Ω
Ω
Internal Compensation Minimizes External Parts
500kHz Fixed Switching Frequency
Synchronized External Clock from 300kHz to 2MHz
Adjustable Soft-Start
Cycle-by-Cycle Over Current Limit
Thermal Shutdown Protection
Available in SOP-8 (Exposed Pad) and WDFN-14L
4x3 Packages
RoHS Compliant and Halogen Free
Ordering Information
RT7262A
Package Type
QW : WDFN-14L 4x3 (W-Type)
SP : SOP-8 (Exposed Pad-Option 2)
Lead Plating System
Z : ECO (Ecological Element with
Halogen Free and Pb free)
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Applications
Distributive Power Systems
Battery Charger
DSL Modems
Pre-Regulator for Linear Regulators
Simplified Application Circuit
V
IN
C
IN
Chip Enable
BOOT
RT7262A
SW
EN/SYNC
VCC
C
C
GND
FB
R
T
R1
R2
C
OUT
C
BOOT
L
V
OUT
VIN
Copyright
©
2012 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS7262A-01
September 2012
www.richtek.com
1
RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
