RT7237A
Ordering Information
RT7237A
Package Type
SP : SOP-8 (Exposed Pad-Option 2)
Lead Plating System
G : Green (Halogen Free and Pb Free)
H : UVP Hiccup
L : UVP Latch-Off
N : UVP Disabled
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Marking Information
RT7237AxGSP : Product Number
RT7237Ax
GSPYMDNN
x : H or L or N
YMDNN : Date Code
Pin Configurations
(TOP VIEW)
BOOT
VIN
SW
GND
2
3
4
8
7
SS
EN
COMP
FB
GND
9
6
5
SOP-8 (Exposed Pad)
Functional Pin Description
Pin No.
1
2
3
4,
9 (Exposed Pad)
5
6
Pin Name
BOOT
VIN
SW
GND
FB
COMP
Pin Function
Bootstrap for High Side Gate Driver. Connect a 0.1μF or greater ceramic
capacitor from BOOT to SW pin.
Supply Voltage Input, 4.5V to 18V. Must bypass with a suitable large ceramic
capacitor.
Switch Node. Connect this pin to an external L-C filter.
Ground. The exposed pad must be soldered to a large PCB and connected to
GND for maximum power dissipation.
Feedback Input. It is used to regulate the output of the converter to a set value
via an external resistive voltage divider.
Compensation Node. COMP is used to compensate the regulation control
loop. Connect a series RC network from COMP to GND. In some cases, an
additional capacitor from COMP to GND is required.
Enable Input. A logic high enables the converter; a logic low forces the IC into
shutdown mode reducing the supply current to less than 3μA.
Soft-Start Control Input. SS controls the soft-start period. Connect a capacitor
from SS to GND to set the soft-start period. A 0.1μF capacitor sets the
soft-start period to 13.5ms.
7
8
EN
SS
Copyright
©
2012 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
2
DS7237A-01
September 2012