欢迎访问ic37.com |
会员登录 免费注册
发布采购

RT6210 参数 Datasheet PDF下载

RT6210图片预览
型号: RT6210
PDF下载: 下载PDF文件 查看货源
内容描述: [暂无描述]
分类和应用:
文件页数/大小: 19 页 / 567 K
品牌: RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
 浏览型号RT6210的Datasheet PDF文件第1页浏览型号RT6210的Datasheet PDF文件第3页浏览型号RT6210的Datasheet PDF文件第4页浏览型号RT6210的Datasheet PDF文件第5页浏览型号RT6210的Datasheet PDF文件第6页浏览型号RT6210的Datasheet PDF文件第7页浏览型号RT6210的Datasheet PDF文件第8页浏览型号RT6210的Datasheet PDF文件第9页  
RT6210
Ordering Information
RT6210
Package Type
SP : SOP-8 (Exposed Pad-Option 2)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Note :
Richtek products are :
�½
Marking Information
RT6210GSP : Product Number
RT6210
GSPYMDNN
YMDNN : Date Code
Pin Configuration
(TOP VIEW)
BOOT
VIN
SW
GND
2
3
4
8
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
SS
EN
COMP
FB
�½
GND
9
7
6
5
SOP-8 (Exposed Pad)
Functional Pin Description
Pin No.
1
2
3
4, 9
(Exposed Pad)
Pin Name
BOOT
VIN
SW
GND
Pin Function
Bootstrap capacitor connection node for high-side gate driver. Connect a 0.1F
ceramic capacitor from BOOT to SW to power the internal gate driver.
Supply voltage input, 5.2V to 80V. Bypass VIN to GND with a large high-quality
capacitor.
Switch node for output inductor connection.
Power ground. The exposed pad must be connected to GND and well soldered
to the input and output capacitors and a large PCB copper area for maximum
power dissipation.
Feedback voltage input. Connect FB to the midpoint of the external feedback
resistor divider to sense the output voltage. The device regulates the FB voltage
at 0.8V (typical) Feedback Reference Voltage.
Compensation node for the compensation of the regulation control loop.
Connect a series RC network from COMP to GND. In some cases, another
capacitor from COMP to GND may be required.
Enable control input. A logic High (V
EN
> 1.3V) enables the device, and a logic
Low (V
EN
< 0.875V) shuts down the device, reducing the supply current to 3A
or below. Connect EN pin to VIN pin with a 100k pull-up resistor for automatic
startup.
Soft-start capacitor connection node. Connect an external capacitor from SS to
GND to set the soft-start time. Do not leave SS pin unconnected. A capacitor of
capacitance from 10nF to 100nF is recommended, which can set the soft-start
time from 1.33ms to 13.3ms, accordingly.
5
FB
6
COMP
7
EN
8
SS
Copyright
©
2019 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
2
DS6210-01 February 2019