欢迎访问ic37.com |
会员登录 免费注册
发布采购

RT6204 参数 Datasheet PDF下载

RT6204图片预览
型号: RT6204
PDF下载: 下载PDF文件 查看货源
内容描述: [暂无描述]
分类和应用:
文件页数/大小: 18 页 / 1188 K
品牌: RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
 浏览型号RT6204的Datasheet PDF文件第1页浏览型号RT6204的Datasheet PDF文件第3页浏览型号RT6204的Datasheet PDF文件第4页浏览型号RT6204的Datasheet PDF文件第5页浏览型号RT6204的Datasheet PDF文件第6页浏览型号RT6204的Datasheet PDF文件第7页浏览型号RT6204的Datasheet PDF文件第8页浏览型号RT6204的Datasheet PDF文件第9页  
RT6204
Ordering Information
RT6204
Package Type
SP : SOP-8 (Exposed Pad-Option 2)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Marking Information
RT6204
GSPYMDNN
RT6204GSP : Product Number
YMDNN : Date Code
Note :
Richtek products are :
Pin Configuration
(TOP VIEW)
BOOT
VIN
SW
GND
2
3
4
8
7
RoHS compliant and compatible with the current
requirements of IPC/JEDEC J-STD-020.
SS
EN
COMP
FB
GND
9
Suitable for use in SnPb or Pb-free soldering processes.
6
5
SOP-8 (Exposed Pad)
Functional Pin Description
Pin No.
1
2
3
4, 9
(Exposed Pad)
Pin Name
BOOT
VIN
SW
GND
Pin Function
Bootstrap capacitor connection node for High-Side Gate Driver. Connect a
0.1F ceramic capacitor from BOOT to SW to power the internal gate driver.
Supply voltage input, 5.2V to 60V. Bypass VIN to GND with a large
high-quality capacitor.
Switch node for output inductor connection.
Power ground. The exposed pad must be connected to GND and well
soldered to the input and output capacitors and a large PCB copper area for
maximum power dissipation.
Feedback voltage input. Connect FB to the midpoint of the external
feedback resistor divider to sense the output voltage. The device regulates
the FB voltage at 0.8V (typical) Feedback Reference Voltage.
Compensation node for the compensation of the regulation control loop.
Connect a series RC network from COMP to GND. In some cases, another
capacitor from COMP to GND may be required.
Enable control input. A logic High (V
EN
> 1.35V) enables the device, and a
logic Low (V
EN
< 0.925V) shuts down the device, reducing the supply
current to 3A or below. Connect EN pin to VIN pin with a 100k pull-up
resistor for automatic startup.
Soft-start capacitor connection node. Connect an external capacitor from SS
to GND to set the soft-start time. Do not leave SS pin unconnected. A
capacitor of capacitance from 10nF to 100nF is recommended, which can
set the soft-start time from 1.33ms to 13.3ms, accordingly.
5
FB
6
COMP
7
EN
8
SS
Copyright © 2018 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
2
DS6204-04
February 2018