2.4-2.8GH
Z
CCTV R
ADIO
V
IDEO
L
INK
INSTALLATION:
TX7303
RX7303
TRANSMITTER
Mount the camera in the correct position. Connect the video cable to the BNC video terminals using 75
ohm coaxial cable. Connect a regulated 12V power supply rated at greater than 0.5 amps to the power
input ensuring the correct polarity.
RECEIVER
Connect the VID and GND video terminal to a monitor using 75 ohm coaxial cable with a Phono connector.
Connect a regulated 12V power supply rated at greater then 0.5 amps to the power input ensuring the correct
polarity.
PROPAGATION
With any radio system there are a number of factors which affect the system performance. These are:
•
•
•
•
•
Transmitter output power
Height of transmitter and receiver antenna
Length and type of coaxial antenna feeder
Topography between transmitter and receiver
The weather
DS053_1
Oct ’00
©2000 Reg. No. 227 4001, ENGLAND
Page 2
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
