Professional Radio Control
Custom systems
PRO
Blade
We regularly supply pre-wired / bespoke systems; please contact our sales department for further assistance
Receiver Unit
The receiver consists of interchangeable modules which are connected via ribbon cables. (as shown below)
Antenna
The Antenna is held internally, this is to save drilling the enclosure on the top. This may have some effect to
the range for specific applications which may require the antenna externally mounted. At all times please
ensure that the antenna is pointing in a vertical direction and away from high interference sources.
PRO-BLADE – 8 CHANNEL RECEIVER
Ordering Information
Range**
Freq
Relay Outputs
(Metres)
(MHz)
(each @230Vac)
PRO-BLADE8
8 channel Remote Control System
500
434.525
8 x 12A
** Range stated is optimum, direct line of sight. In worst conditions this can be reduced significantly
Part Number
Description
Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information.
Use of R.F.Solutions as critical components in life support systems is not authorised except with express written approval from R.F.Solutions Ltd.
DS-PROBLADE-1 Oct ’07
©2007 RF Solutions Ltd, www.rfsolutions.co.uk
Page 2
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
