PROTEXT - GSM R
EMOTE
C
ONTROL
Signal Strength / LED Indication
There are four LEDs on the circuit board. The Green LED indicates power is applied
The three Red LEDs indicate the status of PROTEXT as below
During Initialisation After Power UP
RED LED Action
LED’s illuminate
alternately
All LED’s flash together
Description
PROTEXT is undergoing power up initialisation (can take many
seconds)
No Simcard present
Normal Operation
RED LED Action
No LEDs
One LED on Steady
Two LEDs on Steady
Three LEDs on Steady
Description
No signal
Low signal strength
Medium signal strength
High signal strength
When Transmitting or Receiving a TEXT
RED LED Action
One LED Flashing
TWO LED’s Flashing
Description
PROTEXT is Receiving an SMS
PROTEXT is transmitting an SMS
Power Loss
The PROTEXT has a facility to text a specific number when power fails. This number will be
notified once power is re-applied to the PROTEXT after failure.
In the event of power loss to the PROTEXT the unit will maintain the user configured data
entered during the User set-up sequence, as this information is stored in non-volatile memory.
However the status of the relays will be lost.
Wall Mounting
DS-PROTEXT-9
©
2009 REG No 277 4001, ENGLAND.
Page 7
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
