2.4GH
Z
B
LUETOOTH
T
RANSCEIVER
M
ODULE
P
ROGRAMMING
G
UIDE
Events
Type
Connect
Disconnect
Transaction complete
Code
“C”
“D”
“S”
Parameters
Status (2),
Device ID (2)
Status (2),
Device ID (2)
Status (2)
Description
Connect occurred from device
BRM01
Disconnect occurred from device - See
Status
Codes
The data packet has completed. See Status
Codes
Detailed Descriptions
Add Device To Index
This command allows known devices to be added to the local BRM’s device list. Once in the device list each
connectable BRM is represented by an Index number. This allows incoming and outgoing connection
requests to be validated and identified.
Command Code
(1 byte)
“A”
Parameter 1 – BRM Address
(12 bytes 0-9, A-F)
“xxxxxxxxxxxx”
Parameter 2 – Index ID
(2 bytes 00-1F)
“xx”
Response Code
Status Code *
(1 byte)
(2 bytes 0-9, A-F)
“A”
“xx”
*See Status Codes for meanings
Connect To Device
This command requests an immediate connection to the device whose Index ID is provided in the parameter.
This is useful for testing purposes.
Command Code
(1 byte)
“C”
Parameter 1 – Index ID
(2 bytes 00-1F)
“xx”
Device ID
(2 bytes 00-1F)
“xx”
Response Code
Status Code *
(1 byte)
(2 bytes 0-9, A-F)
“C”
“xx”
*See Status Codes for meanings
Disconnect Device
This command requests an immediate disconnection from the currently connected remote device. This
command should be used after the local device has finished communicating to the remote device.
Command Code
(1 byte)
“D”
Response Code
Status Code *
(1 byte)
(2 bytes 0-9, A-F)
“D”
“xx”
*See Status Codes for meanings
Device ID
(2 bytes 00-1F)
“xx”
DS361-3 Dec 03
©2003 Reg. No. 227 4001, England
Page 5
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
