RF2411
0
RoHS Compliant & Pb-Free Product
Typical Applications
• UHF Digital and Analog Receivers
• Digital Communication Systems
• Commercial and Consumer Systems
• Portable Battery-Powered Equipment
LOW NOISE AMPLIFIER/MIXER
• Spread-Spectrum Communication Systems • General Purpose Frequency Conversion
Product Description
The RF2411 is a monolithic integrated UHF receiver
front-end. The IC contains all of the required components
to implement the RF functions of the receiver except for
the passive filtering and LO generation. It contains an
LNA (low-noise amplifier), a second RF amplifier, and a
balanced mixer which can drive a single-ended or bal-
anced load. The output of the LNA is made available as a
pin to permit the insertion of a bandpass filter between
the LNA and the RF/Mixer section. The LNA output is
buffered to permit a wide range of choices for the inter-
stage filter without altering the VSWR or noise figure at
the LNA input and to provide high isolation from the LO to
the input port. The LNA section may be disabled to con-
serve power.
0.157
0.150
0.018
0.014
0.008
0.004
0.337
0.334
0.050
0.244
0.229
0.068
0.053
8° MAX
0° MIN
0.034
0.016
0.009
0.007
Optimum Technology Matching® Applied
Si BJT
Si Bi-CMOS
InGaP/HBT
GaAs HBT
SiGe HBT
GaN HEMT
GaAs MESFET
Si CMOS
SiGe Bi-CMOS
Package Style: SOIC-14
Features
• Single 3V to 6.5V Power Supply
• 500MHz to 1900MHz Operation
• 25dB Small Signal Gain
LNA
LNA IN 1
GND 2
GND 3
GND 4
GND 5
IF OUT+ 6
IF OUT- 7
RF AMP
14 LNA OUT
13 NC
12 VCC1
11 VCC2
10 RF IN-
9 RF IN+
8 LO IN
• 2.5dB Cascaded Noise Figure
• 8.5mA DC Current Consumption
• -8dBm Input IP
3
MIXER
Ordering Information
RF2411
Low Noise Amplifier/Mixer
RF2411 PCBA-L Fully Assembled Evaluation Board (850MHz)
RF2411 PCBA-H Fully Assembled Evaluation Board (1800MHz)
RF Micro Devices, Inc.
7628 Thorndike Road
Greensboro, NC 27409, USA
Tel (336) 664 1233
Fax (336) 664 0454
http://www.rfmd.com
Functional Block Diagram
Rev A6 060907
8-7