Preliminary
RF2360
Pin
1
2
Function Description
Interface Schematic
No connection. This pin should be connected to the ground plane.
NC
NC
Same as pin 1.
Ground connection. Keep traces physically short and connect immedi-
ately to ground plane for best performance. Each ground pin should
have a via to the ground plane.
3
GND
Same as pin 3.
Same as pin 3.
4
5
6
GND
GND
RF IN
RF input pin. This pin is internally DC blocked. An external DC blocking
capacitor is not required.
3
Same as pin 1.
Same as pin 1.
Same as pin 1.
Same as pin 1.
Same as pin 1.
Same as pin 3.
Same as pin 3.
7
8
9
10
11
12
13
14
NC
NC
NC
NC
NC
GND
GND
RF OUT
RF output and bias pin. Because DC is present on this pin, a DC block-
ing capacitor, suitable for the frequency of operation, should be used in
most applications. For biasing, only an RF choke is needed.
RF OUT
RF IN
Same as pin 1.
Same as pin 1.
15
16
NC
NC
3-40
Rev A9 010824