CGA-7718Z
Pin
1
Function
RF IN
Description
RF input pin. External DC-blocking capacitor is required.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as
possible.
2, 3,
6, 7
4
5
8
GND
Same as pin 1.
RF IN
RF OUT/VCC
RF OUT/VCC
GND
RF output and bias pin (open collector).
Same as pin 5.
Exposed area on the bottom side of the package must be soldered to the ground plane of the board for optimum
thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended
land pattern.
EPAD
Pin Out
Amplifier Configuration
1
2
3
4
8
7
6
5
Part Identification
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
6 of 8
DS121030
RFMD [ RF MICRO DEVICES ]
