RO3101A
•
•
•
•
•
Ideal for European 433.92 MHz Transmitters
Very Low Series Resistance
Quartz Stability
Surface-Mount Ceramic Case
Complies with Directive 2002/95/EC (RoHS)
Pb
The RO3101A is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case.
It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters
operating at 433.92 MHz. This SAW is designed specifically for remote-control and wireless security
transmitters operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17 TR 2100.
433.92 MHz
SAW
Resonator
Absolute Maximum Ratings
Rating
CW RF Power Dissipation (See: Typical Test Circuit)
DC voltage Between Terminals (Observe ESD Precautions)
Case Temperature
Soldering Temperature (10 seconds / 5 cycles max.)
Value
+0
±30
-40 to +85
260
Units
dBm
VDC
°C
°C
SM5035-4
Electrical Characteristics
Characteristic
Center Frequency (+25 °C)
Insertion Loss
Quality Factor
Temperature Stability
Unloaded Q
50
Ω
Loaded Q
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Frequency Aging
RF Equivalent RLC Model
Absolute Value during the First Year
Motional Resistance
Motional Inductance
Motional Capacitance
Shunt Static Capacitance
Test Fixture Shunt Inductance
Lid Symbolization (in addition to Lot and/or Date Codes)
DC Insulation Resistance between Any Two Terminals
R
M
L
M
C
M
C
O
L
TEST
5, 6, 9
2, 7
5, 7, 9
Absolute Frequency
Tolerance from 433.920 MHz
Sym
f
C
Δf
C
IL
Q
U
Q
L
T
O
f
O
FTC
|f
A
|
Notes
2,3,4,5
2,5,6
5,6,7
Minimum
433.845
Typical
Maximum
433.995
±75
Units
MHz
kHz
dB
1.5
9000
1458
10
25
f
C
0.032
≤10
1.0
19.4
63.8
2.11
2.4
55.1
655 // YWWS
2.2
40
°C
ppm/°C
2
ppm/yr
MΩ
Ω
µH
fF
pF
nH
6,7,8
1
5
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
2.
3.
4.
5.
6.
Frequency aging is the change in f
C
with time and is specified at +65°C or
less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture,
decreasing in subsequent years.
The center frequency, f
C
, is measured at the minimum insertion loss point,
IL
MIN
, with the resonator in the 50
Ω
test system (VSWR
≤
1.2:1). The
shunt inductance, L
TEST
, is tuned for parallel resonance with C
O
at f
C
.
Typically, f
OSCILLATOR
or f
TRANSMITTER
is approximately equal to the
resonator f
C
.
One or more of the following United States patents apply: 4,454,488 and
4,616,197.
Typically, equipment utilizing this device requires emissions testing and
government approval, which is the responsibility of the equipment
manufacturer.
Unless noted otherwise, case temperature T
C
= +25°C±2°C.
The design, manufacturing process, and specifications of this device are
7.
8.
9.
10.
subject to change without notice.
Derived mathematically from one or more of the following directly
measured parameters: f
C
, IL, 3 dB bandwidth, f
C
versus T
C
, and C
O
.
Turnover temperature, T
O
, is the temperature of maximum (or turnover)
frequency, f
O
. The nominal frequency at any case temperature, T
C
, may be
calculated from: f = f
O
[1 - FTC (T
O
-T
C
)
2
]. Typically
oscillator
T
O
is
approximately equal to the specified
resonator
T
O
.
This equivalent RLC model approximates resonator performance near the
resonant frequency and is provided for reference only. The capacitance C
O
is the static (nonmotional) capacitance between the two terminals
measured at low frequency (10 MHz) with a capacitance meter. The
measurement includes parasitic capacitance with "NC” pads unconnected.
Case parasitic capacitance is approximately 0.05 pF. Transducer parallel
capacitance can by calculated as: C
P
≈
C
O
- 0.05 pF.
Tape and Reel standard per ANSI / EIA 481.
www.RFM.com
E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 2
RO3101A - 3/26/08
RFM [ RF MONOLITHICS, INC ]
