M52334FP
Pin 14 (RF AGC OUT)
A current mode output is available in the reverse AGC
operation.
The maximum
outflow current
is 0.2 mA.
VCC
Tuner
14
(in open-loop condition)
(V14)
The maximum
inflow current
is 0.2 mA.
strong
electric field
weak
electric field
0
(IF input)
Note: Connecting a nonpolarity capacitor of 1 F between pin 14 and pin 18 improves AGC operating
speed.
In that case, the capacitors between pin 14/pin 18 and ground should be removed.
Pin 15 (GND)
15
It is GND pin except for SIF.
Pin 16, Pin 17 (VIF IN)
Bias
17
SAW
1.2 k
16
It should be designed considering careful impedance
matching with the SAW filter.
Terminal voltage
: 1.45 V
1.2 k
Pin 18 (RF AGC DELAY)
An applied voltage to the pin 18 is for changing a RF AGC
delay point.
VCC
In the 3-in-1 type application, the regulated output from the
regulator is suitable for a power supply (VCC) to it, because
there may be difference between the tuner and main board
18
supply.
TV tuner, VIF demodulator and RF modulator are togetherin
one package.
Rev.2.00 Jun 14, 2006 page 16 of 18