M51326P
Sound (1) measuring the control-pin threshold-voltage value:
Firstly, DC voltage V6 is increased from 3 V to 5 V. Here, we take V
ICL
as the V6 value at which the AC
component in the output waveform from pin 1 is turned off. Then, DC voltage V6 is increased from 7 V to 9 V.
Here, we take V
ICH
as the V6 value at which the AC component in the output waveform from pin 1 is turned on
.
AC components
Pin 1
ON
AC output waveform
OFF
ON
V
ICL
V
ICH
V
6
DC voltage
Sound (2) measuring the control-pin threshold-value voltage:
DC voltage V13 is increased from 1 V to 3 V. Here, we take the V13 value at which the AC component in the
output waveform from pin 8 is turned on as V
IC
.
AC components
Pin 8
OFF
ON
AC output waveform
V
IC
V
13
DC voltage
Measuring the image control pin threshold value voltage:
DC voltage V4 is increased from 1 V to 3 V. This time, we take the V14 value at which the AC component in
the output waveform from pin 12 is turned on as V
IC
.
AC components
Pin 12
OFF
ON
AC output waveform
V
IC
V
4
DC voltage
Rev.1.0, Sep.22.2003, page 6 of 13