SLOS580B – MAY 2008 – REVISED JULY 2008................................................................................................................................................................
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
(1)
VALUE
V
CC
V
O
V
IT
V
I
I
O
Input supply voltage.
(2)
UNIT
V
V
V
V
mA
kV
kV
V
°C
V
CC1
, V
CC2
–0.3 to 6
–9 to 14
–50 to 50
–0.5 to 7
±10
Bus pins and GND1
±6
±16
±4
±1
±200
170
JEDEC Standard 22,
Test Method A114-C.01
JEDEC Standard 22,
Test Method C101
ANSI/ESDS5.2-1996
Bus pins and GND2
All pins
Voltage at any bus I/O terminal
Voltage input, transient pulse, A, B, Y, and Z (through 100Ω, see
Voltage input at any D, DE or RE terminal
Receiver output current
Human Body Model
ESD
Electrostatic
discharge
Charged Device
Model
Machine Model
All pins
T
J
(1)
(2)
Maximum junction temperature
Stresses beyond those listed under
absolute maximum ratings
may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under
recommended operating
conditions
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values except differential I/O bus voltages are with respect to network ground terminal and are peak voltage values
RECOMMENDED OPERATING CONDITIONS
MIN
V
CC
V
OC
V
IH
V
IL
V
ID
R
L
I
O
T
J
Supply Voltage, V
CC1
, V
CC2
Voltage at either bus I/O terminal
High-level input voltage
Low-level input voltage
Differential input voltage
Differential input resistance
Output current
Operating junction temperature
Driver
Receiver
A, B
D, DE, RE
A with respect to B
3.15
–7
2
0
–12
54
–60
–8
–40
60
60
8
150
TYP
3.3
MAX
3.6
12
V
CC
0.8
12
UNIT
V
V
V
V
Ω
mA
°C
SUPPLY CURRENT
over recommended operating condition (unless otherwise noted)
PARAMETER
ISO35
I
CC1
Logic-side supply
current
ISO15
ISO35
I
CC2
Bus-side supply
current
ISO15
TEST CONDITIONS
RE at 0 V or Vcc, DE at 0 V, No load (driver disabled)
RE at 0 V or Vcc, DE at V
CC
, No Load (driver enabled)
RE at 0 V or Vcc, DE at 0 V, No load (driver disabled)
RE at 0 V or Vcc, DE at V
CC
, No Load (driver enabled)
RE at 0 V or Vcc, DE at 0 V, No load (driver disabled)
RE at 0 V or Vcc, DE at V
CC
, No Load (driver enabled)
RE at 0 V or Vcc, DE at 0 V, No load (driver disabled)
RE at 0 V or Vcc, DE at V
CC
, No Load (driver enabled)
MIN
TYP
MAX
8
8
8
8
15
19
15
19
UNIT
mA
mA
mA
mA
2
Product Folder Link(s):
Copyright © 2008, Texas Instruments Incorporated
RENESAS [ RENESAS TECHNOLOGY CORP ]
