2.5.1
Data Transfer Instructions
Table 2.4 describes the data transfer instructions. Figure 2.5 shows their object code formats.
Table 2.4 Data Transfer Instructions
Instruction
Size*
Function
MOV
B/W
(EAs) → Rd, Rs → (EAd)
Moves data between two general registers or between a general
register and memory, or moves immediate data to a general register.
The Rn, @Rn, @(d:16, Rn), @aa:16, #xx:8 or #xx:16, @–Rn, and
@Rn+ addressing modes are available for byte or word data. The
@aa:8 addressing mode is available for byte data only.
The @–R7 and @R7+ modes require word operands. Do not specify
byte size for these two modes.
MOVTPE
MOVFPE
PUSH
B
Not supported by the H8/3337 Series and H8/3397 Series.
Not supported by the H8/3337 Series and H8/3397 Series.
Rn → @–SP
B
W
Pushes a 16-bit general register onto the stack. Equivalent to
MOV.W Rn, @–SP.
POP
W
@SP+ → Rn
Pops a 16-bit general register from the stack. Equivalent to MOV.W
@SP+, Rn.
Note: * Size: Operand size
B: Byte
W: Word
40