欢迎访问ic37.com |
会员登录 免费注册
发布采购

HD64F3337YF16 参数 Datasheet PDF下载

HD64F3337YF16图片预览
型号: HD64F3337YF16
PDF下载: 下载PDF文件 查看货源
内容描述: 单片机 [Single-Chip Microcomputer]
分类和应用: 微控制器和处理器外围集成电路
文件页数/大小: 747 页 / 2993 K
品牌: RENESAS [ RENESAS TECHNOLOGY CORP ]
 浏览型号HD64F3337YF16的Datasheet PDF文件第318页浏览型号HD64F3337YF16的Datasheet PDF文件第319页浏览型号HD64F3337YF16的Datasheet PDF文件第320页浏览型号HD64F3337YF16的Datasheet PDF文件第321页浏览型号HD64F3337YF16的Datasheet PDF文件第323页浏览型号HD64F3337YF16的Datasheet PDF文件第324页浏览型号HD64F3337YF16的Datasheet PDF文件第325页浏览型号HD64F3337YF16的Datasheet PDF文件第326页  
Bit 3—Arbitration Lost Flag (AL): This flag indicates that arbitration was lost in master mode.  
The I2C bus interface monitors the bus. When two or more master devices attempt to seize the bus  
at nearly the same time, if the I2C bus interface detects data differing from the data it sent, it sets  
AL to 1 to indicate that the bus has been taken by another master. At the same time, it sets the  
IRIC bit in ICSR to generate an interrupt request.  
AL is cleared by reading AL after it has been set to 1, then writing 0 in AL. In addition, AL is  
reset automatically by write access to ICDR in transmit mode, or read access to ICDR in receive  
mode.  
Bit 3: AL  
Description  
0
Bus arbitration won  
(Initial value)  
This bit is cleared to 0 at the following times:  
When ICDR data is written (transmit mode) or read (receive mode)  
When AL is read while AL = 1, then 0 is written in AL  
1
Arbitration lost  
This bit is set to 1 at the following times:  
If the internal SDA signal and bus line disagree at the rise of SCL in master  
transmit mode  
If the internal SCL is high at the fall of SCL in master transmit mode  
Bit 2—Slave Address Recognition Flag (AAS): When the addressing format is selected (FS = 0)  
in slave receive mode, this flag is set to 1 if the first byte following a start condition matches bits  
SVA6 to SVA0 in SAR, or if the general call address (H'00) is detected.  
AAS is cleared by reading AAS after it has been set to 1, then writing 0 in AAS. In addition, AAS  
is reset automatically by write access to ICDR in transmit mode, or read access to ICDR in receive  
mode.  
Bit 2: AAS  
Description  
0
Slave address or general call address not recognized  
This bit is cleared to 0 at the following times:  
(Initial value)  
When ICDR data is written (transmit mode) or read (receive mode)  
When AAS is read while AAS = 1, then 0 is written in AAS  
1
Slave address or general call address recognized  
This bit is set to 1 at the following times:  
When the slave address or general call address is detected in slave receive  
mode  
292  
 复制成功!