Notes: 1. Connect VDD-PLL1/2, VDD-RTC, and VDD-CPG to VDDQ, and VSS-CPG, VSS-PLL1/2, and VSSQ-RTC to GND,
regardless of whether or not the PLL circuits and RTC are used.
2. The current dissipation values are for VIH min = VDDQ – 0.5 V and VIL max = 0.5 V with all
output pins unloaded.
3. IDDQ is the sum of the VDDQ, VDD-PLL1/2, VDD-RTC, and VDD-CPG 3.3 V system currents.
*
To reduce the leakage current in standby mode, the RTC must be turned on (input the
clock from EXTAL2 and set RCR2.RTCEN to 1).
Rev. 6.0, 07/02, page 833 of 986