Item
Symbol
VOH
Min
2.4
—
Typ
—
Max
—
Unit Test Conditions
Output
voltage
All output
pins
V
VOL
—
0.55
180
Pull-up
resistance
All pull-up
resistance
Rpull
20
60
kΩ
Pin
All pins
CL
—
—
10
pF
capacitance
Notes: 1. Connect VDD-PLL1/2, VDD-RTC, and VDD-CPG to VDDQ, and VSS-CPG, VSS-PLL1/2, and VSSQ-RTC to GND,
regardless of whether or not the PLL circuits and RTC are used.
2. The current dissipation values are for VIH min = VDDQ – 0.5 V and VIL max = 0.5 V with all
output pins unloaded.
3. IDDQ is the total current value for the 3.3 V versions of VDDQ, VDD-PLL1/2, VDD-RTC, and VDD-CPG
.
*1 RCR2.RTCEN must be set to 1 to reduce the leak current in the standby mode. (There
is no need to input a clock from EXTAL2.)
*2 RTCON refers to the status in which RCR2.RTCEN is set to 1 and a clock is being input
to EXTAL2.
Rev. 6.0, 07/02, page 817 of 986
RENESAS [ RENESAS TECHNOLOGY CORP ]
