HD151015
9 bit Level Shifter/Transceiver With 3 State Outputs
REJ03D0300-0500
Rev.5.00
May 10, 2006
Description
The HD151015 is an IC which consists of 9 bus transceivers (three state output) in a 24 pin package. Signals are
transmitter from A to B when the direction control input (DiR) is at a high level, and from B to A when DiR is at a low
level. When the enable input (G) is high, A and B are isolated. And this product has two terminals (V
CCA
, V
CCB
), V
CCA
is connected with control input and A bus side, V
CCB
is connected with B bus side. V
CCA
and V
CCB
are isolated.
Consequently, it is best to change the level in case of two supply voltage coexist on one board and application of power
management.
Features
•
This product function as level shift transceiver that change V
CCA
input level to V
CCB
output level, V
CCB
input level to
V
CCA
output level by providing different supply voltages to V
CCA
and V
CCB
.
•
This product is able to the power management : Turn on and off the supply on V
CCB
side with providing the supply
of V
CCA
.
(Enable input (G) : High level)
•
Inputs and outputs are CMOS level, and the power dissipation is the same as CMOS standard logic.
•
Wide operating supply voltage range:
V
CCA
= V
CCB
= 2 to 6 V (V
CCB
≥
V
CCA
– 0.5 V)
•
Wide operating temperature range: Ta = –40 to 85°C
•
Ordering Information
Part Name
HD151015TEL
Package Type
TSSOP-24 pin
Package Code
(Previous Code)
PTSP0024JB-A
(TTP-24DBV)
T
Package
Abbreviation
Taping Abbreviation
(Quantity)
EL (1,000 pcs/reel)
Rev.5.00, May 10, 2006, page 1 of 10