R32C/116A Group
1. Overview
Table 1.2
Unit
R32C/116A Group Performance for the 176-pin Package (2/2)
Function Performance
Timer A
Timer
16-bit timer × 5
Timer mode, event counter mode, one-shot timer mode, pulse-width
modulation (PWM) mode
Two-phase pulse signal processing in event counter mode (two-
phase encoder input) × 3
Timer B
16-bit timer × 6
Timer mode, event counter mode, pulse frequency measurement
mode, pulse-width measurement mode
Three-phase
motor control
timer
Three-phase motor control timer × 1 (timers A1, A2, A4, and B2 used)
8-bit programmable dead time timer
Serial
Interface
UART0 to
UART10
Asynchronous/synchronous serial interface × 11 channels
2
• I C-bus (UART0 to UART6)
• Special mode 2 (UART0 to UART6)
(1)
• IEBus (optional ) (UART0 to UART6)
A/D Converter
10-bit resolution × 34 channels
Sample and hold functionality integrated
Self test/Open-circuit detection assist
D/A Converter
CRC Calculator
X-Y Converter
Intelligent I/O
8-bit resolution × 2
16
12
5
CRC-CCITT (X + X + X + 1)
16 bits × 16 bits
Time measurement (input capture): 16 bits × 16
Waveform generation (output compare): 16 bits × 24
Serial interface: Variable-length synchronous serial I/O mode, IEBus
(1)
mode (optional
1 channel
)
2
Multi-master I C-bus Interface
Flash Memory
Programming and erasure supply voltage: VCC = 3.0 to 5.5 V
Minimum endurance: 1,000 program/erase cycles
Suspend/resume function available
Security protection: ROM code protect, ID code protect
Debugging: On-chip debug, on-board flash programming
Operating Frequency/Supply
Voltage
64 MHz/VCC = 3.0 to 5.5 V
Operating Temperature
-20°C to 85°C (N version)
-40°C to 85°C (D version)
-40°C to 85°C (P version)
Current Consumption
45 mA (VCC = 5.0 V, f(CPU) = 64 MHz)
8 µA (VCC = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode)
Package
Note:
176-pin plastic molded LQFP (PLQP0176KB-A)
1. Please contact a Renesas Electronics sales office to use the optional feature.
REJ03B0297-0100 Rev.1.00
Jul 16, 2010
Page 3 of 99