RTL8306SD/RTL8306SDM
Datasheet
SMI
EEPROM
Drive
(mA)
Pin
No.
Pin Name
Type
Description
Accessible Accessible
DisARP
/LED_SPD[3]
98 I/O
(IPU)
4
4
4
Input Upon Reset = Disable ARP broadcast to all
VLANs.
1: Disables ability to broadcast ARP broadcast
packets to all VLANs
0: Enables ability to broadcast ARP broadcast
packets to all VLANs
ARP broadcast frame: DID is all F.
Output After Reset = Used for LED.
√
√
DisLeaky
/LED_ADD[2]
101 I/O
(IPU)
Input Upon Reset = Disable Leaky VLAN.
1: Disable forwarding of unicast frames to other
VLANs
0: Enable forwarding of unicast frames to other
VLANs
Broadcast and multicast frames adhere to the VLAN
configuration.
Output After Reset = Used for LED.
√
√
EnForward
/LED_ADD[0]
111 I/O
(IPU)
Input Upon Reset = Enable to forward 802.1D
specified reserved multicast addresses frame.
1: Forward reserved control frames, with DID=01-
80-C2-00-00-04 to 01-80-C2-00-00-0F
0: Filter reserved control packets, with DID=01-80-
C2-00-00-04 to 01-80-C2-00-00-0F
√
√
√
√
Output After Reset = Used for LED.
BCInDrop
/LED_ACT[0]
113 I/O
(IPU)
4
4
4
Input Upon Reset = Broadcast Input Drop.
1: Use Broadcast Input drop mechanism
0: Use Broadcast Output drop mechanism
Output After Reset = Used for LED.
Max1536
/LED_SPD[0]
114 I/O
(IPU)
Input Upon Reset = Maximum Frame Length.
1: 1536 Bytes
0: 1552 Bytes
√
√
Output After Reset = Used for LED.
LED_DUP[0]
115 I/O
(IPU)
Input Upon Reset.
1: Port 0 in UTP mode
0: Reserved
N/A
N/A
Output After Reset = Used for LED.
6-Port 10/100Mbps Single-Chip Dual MII/RMII Switch Controller
28
Track ID: JATR-1076-21 Rev. 1.1