RTL8110S-32/RTL8110S-64
Datasheet
COPYRIGHT
©2003 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written
permission of Realtek Semiconductor Corp.
TRADEMARKS
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are
trademarks/registered trademarks of their respective owners.
DISCLAIMER
Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied, including, but not limited
to, the particular purpose. Realtek may make improvements and/or changes in this document or in the product described in this
document at any time. This document could include technical inaccuracies or typographical errors.
USING THIS DOCUMENT
This document is intended for use by the software engineer when programming for Realtek RTL8110S-32 & RTL8110S-64
controller chips. Information pertaining to the hardware design of products using these chips is contained in a separate
document.
Though every effort has been made to ensure that this document is current and accurate, more information may have become
available subsequent to the production of this guide. In that event, please contact your Realtek representative for additional
information that may help in the development process.
REVISION HISTORY
Revision
1.0
Release Date
2003/03/20
2003/04/12
2003/06/24
Summary
First release.
1.1
Revised pin name and pin assignments.
Minor 233-pin TFBGA pin number corrections.
IEEE 802.3z changed to IEEE 802.3ab in General Description.
1.2
1.3
1.4
2003/09/23
2003/09/24
Add the voltage variation to DC characteristics.
Remove “JTAG support” from the Features section. The RTL8110S does not
support JTAG.
Integrated Gigabit Ethernet Controller
ii
Track ID: JATR-1076-21 Rev. 1.4
REALTEK [ Realtek Semiconductor Corp. ]
