MIL-M-38510/101J
3. REQUIREMENTS
3.1 Qualification. Microcircuits furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract
award (see 4.3 and 6.4).
3.2 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified
herein or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall
not affect the form, fit, or function as described herein.
3.3 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as
specified in MIL-PRF-38535 and herein.
3.3.1 Terminal connections. The terminal connections shall be as specified on figure 1.
3.3.2 Schematic circuits. The schematic circuits shall be maintained by the manufacturer and made available to the
qualifying activity and the preparing activity (DSCC-VAS) upon request.
3.3.3 Case outlines. The case outlines shall be as specified in 1.2.3.
3.4 Lead material and finish. Lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).
3.5 Electrical performance characteristics. The following electrical performance characteristics apply over the full
operating ambient temperature range of -55°C to +125°C and for supply voltages
±5
V dc to
±20
V dc, unless otherwise
specified (see table I).
3.5.1 Offset null circuits. Each amplifier having nulling inputs (device types 01, 02, 03, 05, and 07) shall be capable of
being nulled 1 mV beyond the specified offset voltage limits for -55°C
≤
T
A
≤
+125°C using the circuits of figure 2.
3.5.2 Frequency compensation. Device types 01, 02, 07, and 08 shall be free of oscillation when operated in a unity gain
non-inverting mode with no external compensation and a source resistance of
≤
10 kΩ, and when operated in any test
condition specified herein. Device types 03, 04, 05, and 06 shall be free from oscillation when compensated with a 30 pF
capacitor for all gain configurations or a 3 pF capacitor when used with a gain of 10.
3.6 Rebonding. Rebonding shall be in accordance with MIL-PRF-38535.
3.7 Electrical test requirements. Electrical test requirements for each device class shall be the subgroups specified in
table II. The electrical tests for each subgroup are described in table III.
3.8 Marking. Marking shall be in accordance with MIL-PRF-38535.
3.9 Microcircuit group assignment. The devices covered by this specification shall be in microcircuit group number 49
(see MIL-PRF-38535, appendix A).
4
RAYTHEON [ RAYTHEON COMPANY ]
