MIL-M-38510/101J
1.2.3 Case outlines. The case outlines shall be designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
A 2/
GDFP5-F14 or CDFP6-F14
GDFP4-14
14
14
14
14
16
16
8
10
10
8
Flat pack
Flat pack
Dual-in-line
Flat pack
Dual-in-line
Flat pack
Can
Flat pack
Can
B 2/
C
D
E
GDIP1-T14 or CDIP2-T14
GDFP1-F14 or CDFP2-F14
GDIP1-T16 or CDIP2-T16
GDFP2-F16 or CDFP3-F16
MACY1-X8
GDFP1-F10 or CDFP2-F10
MACY1-X10
GDIP1-T8 or CDIP2-T8
GDFP1-G10
F
G
H
I
P
Z
Dual-in-line
Flat pack with gullwing leads
Square leadless chip carrier
10
20
2
CQCC1-N20
1.3 Absolute maximum ratings.
Supply voltage range (V ).............................................................................±22 V dc 3/
CC
Input voltage range .........................................................................................±20 V dc 4/
Differential input voltage range .......................................................................±30 V dc 5/
Input current range .........................................................................................-0.1 mA to +10 mA
Storage temperature range .............................................................................-65°C to +150°C
Output short-circuit duration ............................................................................Unlimited 6/
Lead temperature (soldering, 60 seconds) .....................................................+300°C
Junction temperature (T ) ...............................................................................+175°C 7/
J
1.4 Recommended operating conditions.
Supply voltage (V ) ......................................................................................±5 V dc to ±20 V dc
CC
Ambient temperature range (T ) ....................................................................-55°C to +125°C
A
______
2/ Inactive package case outline.
3/ Voltages in excess of these may be applied for short-term tests if voltage difference does not exceed 44 volts.
4/ For supply voltages less than ±20 V dc, the absolute maximum input voltage is equal to the supply voltage.
5/ For device types 04, 06, and 07 only, this rating is ±1.0 V unless resistances of 2 kΩ or greater are inserted in
series with the inputs to limit current in the input shunt diodes to the maximum allowable value.
6/ Short circuit may be to ground or either supply. Rating applies to +125°C case temperature or +75°C
ambient temperature.
7/ For short term test (in the specific burn-in and life test configuration when required and up to 168 hours
maximum) T = +275°C.
J
2