MIL-M-38510/101J
1.2.3 Case outlines. The case outlines shall be designated in MIL-STD-1835 and as follows:
Outline letter
A 2/
B 2/
C
D
E
F
G
H
I
P
Z
2
Descriptive designator
GDFP5-F14 or CDFP6-F14
GDFP4-14
GDIP1-T14 or CDIP2-T14
GDFP1-F14 or CDFP2-F14
GDIP1-T16 or CDIP2-T16
GDFP2-F16 or CDFP3-F16
MACY1-X8
GDFP1-F10 or CDFP2-F10
MACY1-X10
GDIP1-T8 or CDIP2-T8
GDFP1-G10
CQCC1-N20
Terminals
14
14
14
14
16
16
8
10
10
8
10
20
Package style
Flat pack
Flat pack
Dual-in-line
Flat pack
Dual-in-line
Flat pack
Can
Flat pack
Can
Dual-in-line
Flat pack with gullwing leads
Square leadless chip carrier
1.3 Absolute maximum ratings.
Supply voltage range (V
CC
).............................................................................
±22
V dc 3/
Input voltage range .........................................................................................
±20
V dc 4/
Differential input voltage range .......................................................................
±30
V dc 5/
Input current range ......................................................................................... -0.1 mA to +10 mA
Storage temperature range ............................................................................. -65°C to +150°C
Output short-circuit duration ............................................................................ Unlimited 6/
Lead temperature (soldering, 60 seconds) ..................................................... +300°C
Junction temperature (T
J
) ............................................................................... +175°C 7/
1.4 Recommended operating conditions.
Supply voltage (V
CC
) ......................................................................................
±5
V dc to
±20
V dc
Ambient temperature range (T
A
) .................................................................... -55°C to +125°C
______
2/ Inactive package case outline.
3/ Voltages in excess of these may be applied for short-term tests if voltage difference does not exceed 44 volts.
4/ For supply voltages less than
±20
V dc, the absolute maximum input voltage is equal to the supply voltage.
5/ For device types 04, 06, and 07 only, this rating is
±1.0
V unless resistances of 2 kΩ or greater are inserted in
series with the inputs to limit current in the input shunt diodes to the maximum allowable value.
6/ Short circuit may be to ground or either supply. Rating applies to +125°C case temperature or +75°C
ambient temperature.
7/ For short term test (in the specific burn-in and life test configuration when required and up to 168 hours
maximum) T
J
= +275°C.
2
RAYTHEON [ RAYTHEON COMPANY ]
