R&E International
RE46C114
Ionization Smoke Detector IC
Product Specification
General Description
The RE46C114 is an ionization type smoke detector IC.
It is intended for applications using ionization type
chambers to detect smoke. When enabled, VOUT is
1/2 of either the DETECT input or VDD depending on
the status of the SELECT input. When the Select input
is allowed to float the circuit is in the low current mode
with only the guard amplifier enabled.
Utilizing low power CMOS technology the RE46C114
was designed for use in smoke detectors that comply
with Underwriters Laboratory Specification UL217.
Features
•
•
•
•
•
•
•
Guard Outputs for Ion Detector Input
± 0.75pA Detect Input Current
Microprocessor A/D Compatible Analog Output
Low Quiescent Current Consumption (<10uA)
Available in 8L PDIP or 8L N SOIC
2000V ESD Protection (HBM)
Available in Standard Packaging or RoHS
compliant Pb free packaging
Pin Configuration
1
8
G2
DETECT
G1
VO UT
VDD
VCC
SELECT
VSS
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Supply Voltage
Supply Voltage
Detect Input Voltage Range
SELECT Input Voltage Range
Operating Temperature
Storage Temperature
Maximum Junction Temperature
SYMBOL
V
DD
V
CC
V
INDET
V
INSEL
T
A
T
STG
T
J
VALUE
12.5
6
V
DD
+.3
V
CC
+.3
-10 to 60
-55 to 125
150
UNITS
V
V
V
V
°C
°C
°C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are
stress ratings only and operation at these conditions for extended periods may affect device reliability.
This product utilizes CMOS technology with static protection; however proper ESD prevention procedures should be used
when handling this product. Damage can occur when exposed to extremely high static electrical charge
Telephone 610.992.0727
Page 1 of 5
E-mail: rande@randeint.com
DS-RE46C114-011207
This datasheet contains PROPRIETARY and CONFIDENTIAL information.
Facsimile 610.992.0734