RA6963
Preliminary Version 1.3
Dot Matrix LCD Controller
6-18 Cursor Auto Moving
<Table 6-27>
Function
Code
Hex.
D1
D2
Enable/Disable the
automatic cursor
movement
Data
(Bit0)
Do not care
(Note)
01100000
60h
Note: In this function, it must be sent two data before sending the command, but the contents of the
second datum (D2) can be any values.
<Table 6-28>
Cursor Auto Moving Selection (D1)
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
x
x
x
x
x
x
x
0/1
Bit0 = 0: Disable.
Bit0 = 1: Enable.
The RA6963 provides a unique function for the automatic cursor movement. After writing (reading)
each displayed datum, the cursor pointer is automatically increased/decreased by one in the Cursor
Auto-Moving mode.
6-19 CGROM Font Select
<Table 6-29>
Code
Hex.
Function
Change the Character
Font Map
D1
Data
(Bit1~Bit0)
D2
Do not care
(Note)
01110000
70h
Note: In this function, it must be sent two data before sending the command, but the contents of the
second datum (D2) can be any values.
<Table 6-30>
CGROM Font Selection (D1)
Bit 1
Bit 0
CGROM Font
Do not care(Default)
Do not care
CGROM Font-01.
CGROM Font-02.
0
0
1
1
0
1
0
1
This command (70h) is a convenient function for selecting the Character Font Map. The user can get
more built-in characters from CGROM Font-01 or CGROM Font-02, which is determined by software
selections. The selections are listed in the Table 6-30.
RAiO TECHNOLOGY INC.
www.raio.com.tw
33/46