QN8007B/8007LB
REVISION HISTORY
REVISION
CHANGE DESCRIPTION
DATE
1.0
2.0
Datasheet Release
06/12/08
8/26/08
B1 Register set incorporated, INT pin added to Figure 1.
1. Table 3 Vcc range:2.7~5.0 v, TYP:3.3 v;
2. In Section 4.1: Modify 124 to 121dBµVp.
3. In Section 4.4: Delete” When there is no audio signal for a pre-determined period,
AGC will power down the transmitter. ”
2.01
03/17/09
Modify Figure1, Figure 2 and the pictures in Section 6.3: Pin20, should be DIN not
DIN/INT
2.02
05/12/09
2.03
2.04
2.05
2.06
2.07
2.08
Add the Register STATUS2(RO) Address 1Bh
Update the data in Table 4 and Table 6.
06/02/09
06/19/09
07/30/09
08/05/09
09/09/09
10/12/09
Modify the register PWROUT_CAL PAC_TARGET and the description
Update the registers in Section 7.
Modify tdtHD MIN 100 ns20 ns in table 8
Modify the description of register PAC_TARGET
1. Modify I2C to 2-wire;
2. Add Reg 59h, Reg 5Ah.
3. Update the grammar and syntax.
4. Modify Vain Max value: 1400 mV2000 mV
2.09
11/19/09
STATEMENT:
Users are responsible for compliance with local regulatory requirements for low power unlicensed FM
broadcast operation. Quintic is not responsible for any violations resulting from user’s intentional or
unintentional breach of regulatory requirements in personal or commercial use.
Rev 2.09 (11/09)
Confidential A
Copyright ©2009 by Quintic Corporation
Confidential Information contained herein is covered under Non-Disclosure Agreement (NDA).
Page 3
QUANTUM [ QUANTUM RESEARCH GROUP ]
