QN8006B/8006LB
REVISION HISTORY
REVISION
CHANGE DESCRIPTION
DATE
0.11
2.0
Initial from Qn8006/L datasheet v1.0
B1 register set incorporated.
7/10/08
7/25/08
Correct performance data in key feature section to accord with characteristics
table
2.01
8/25/08
Further explain PWROUT_CAL[7:0] at 0Ch;
Modify the CIDR1 05h 0/1/2/3 minor version
Modify the CIDR2 06h A/B/C/D major version;
Modify 2-wire to I2C, I2S to I2S, IDLE to IDLE, Table 1 and format
2.01b
2.01c
9/18/08
02/04/09
1. Table 3 Vcc range:2.7~5.0 v, TYP:3.3 v;
2. In Section 4.1: Modify 124 to 121dBµVp.
3. In Section 4.5: Delete” When there is no audio signal for a pre-determined
period, AGC will power down the transmitter. ”
2.02
03/17/09
2.03
2.04
2.05
2.06
Update the value in Section 2
06/15/09
07/30/09
08/05/09
10/12/09
Modify the register PWROUT_CALÆ PAC_TARGET and the description
Update the registers in Section 7.
Modify the description of register PAC_TARGET
1. Modify I2C to 2-wire;
2. Table 6: Rin 75 ΩÆ 5 kΩ;
2.07
2.08
3. Add Reg 21h , Reg 22h, Reg 59h, Reg 5Ah.
4. Update the grammar and syntax
5. Modify Vain Max value: 1400 mVÆ2000 mV
11/23/09
04/20/10
Minor changes in the “Key features”
STATEMENT:
Users are responsible for compliance with local regulatory requirements for low power unlicensed FM
broadcast operation. Quintic is not responsible for any violations resulting from user’s intentional or
unintentional breach of regulatory requirements in personal or commercial use.
Rev 2.08 (04/10)
Copyright ©2010 by Quintic Corporation
Page 3
Confidential A
Confidential Information contained herein is covered under Non-Disclosure Agreement (NDA).