AND180HSP
Ultra Bright LED Lamps: Type 3
Weight: 0.31 g
Unit: mm
AND180HSP
5.6±0.3
InGaAlP High Brightness Red Light Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength (lp = 623 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive Use
•
RoHS Compliant
Maximum Ratings (T
a
= 25°C)
Characteristics
Forward Current
Symbol
I
F
V
R
P
D
T
Opr
T
Stg
5.0±0.2
1.0±0.2
0.5
1.0 MIN.
26.4 MIN.
8.6±0.3
Rating
50
5
125
-40 to 85
-40 to 100
Unit
mA
V
mW
°C
°C
2.54
Cathode Index
0.5
Reverse Voltage
Power Dissipation
Operating Temperature Range
1. Anode
2. Cathode
1
2
Storage Temperature Range
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics
Forward Voltage
Reverse Current
Luminous Intensity
Peak Emission Wavelength
Spectral Line Half Width
Dominant Wavelength
Full Viewing Angle
Symbol
V
F
I
R
I
V
l
P
∆l
ld
q
Test Condition
I
F
= 20 mA
V
R
= 4 V
I
F
= 20 mA
I
F
= 20 mA
I
F
= 20 mA
I
F
= 20 mA
I
V
= 1/2 Peak
Minimum
–
–
3,200
–
–
–
–
Typical
2.1
–
6,000
623
18
613
6
Maximum
2.8
10
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
sales@purdyelectronics.com
• www.purdyelectronics.com
6/14/07
PURDY [ PURDY ELECTRONICS CORPORATION ]
