November 2006
rev 0.2
AC Timing Waveforms
ASM2P5T9070A
Propagation and Skew Waveforms
NOTE: Pulse Skew is calculated using the following expression:
t
SK(P)
= | t
PHL
- t
PLH
|
where t
PHL
and
tPLH
are measured on the controlled edges of any one output from rising and falling edges of a single pulse. Please note that the t
PHL
and
t
PLH
shown are not valid measurements for this calculation because they are not taken from the same pulse.
Gate Disable/Enable Runt Pulse Generation
NOTE: As shown, it is possible to generate runt pulses on gate disable and enable of the outputs. It is the user's responsibility to time their Gx signals to avoid
this problem.
2.5V Single Data Rate 1:10 Clock Buffer Terabuffer
Notice: The information in this document is subject to change without notice.
5 of 9