January 2006
ASM2P20807A
rev 0.2
Power Supply Characteristics
Symbol
Parameter
Test Conditions1
Min
Typ2
Max
Unit
ICCL
Quiescent
Power
VCC= Max
Supply Current TTL
Inputs HIGH
-
0.1
20
µA
ICCH
VIN = GND or VCC
∆ICC
Power Supply Current
per Input HIGH
VCC= Max
-
-
45
40
300
-
µA
V
IN = VCC -0.6V
ICCD
Dynamic Power Supply
Current per Output3
VCC= 2.7V and 15 pF load
150 MHz
µA
/MHz
IC
Total Power Supply VCC= Max.
VIN= VCC
Current4
-
-
105
105
125
125
VIN= GND
CL= 12pF
mA
All outputs toggling
fi = 150MHz
VIN= VCC –0.6V
VIN= GND
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 2.5V, +25°C ambient.
3. This parameter is not directly testable, but is derived for use in Total Power Supply calculations.
4. IC = IQUIESCENT + IINPUTS + IDYNAMIC
I
C = ICC + ∆ICC DHNT + ICCD (fi)
ICC = Quiescent Current (ICCL, ICCH and ICCZ
)
∆ICC = Power Supply Current for a TTL High Input (VIN = VCC -0.6V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fi = Input Frequency
2.5V CMOS 1-TO-10 CLOCK DRIVER
3 of 12
Notice: The information in this document is subject to change without notice.